{"title":"Milltek Audi A5 Performance Exhaust Systems","description":"\u003cp\u003eMilltek's Audi A5 range is made up of cat-back exhaust systems for the Coupé from 2007 and the Sportback and Cabriolet from 2009. Petrol owners can choose systems for the 2.0 TFSI in two-wheel-drive and quattro form, and diesel owners have options for the 2.0 TDI Coupé and the 3.0 TDI quattro with a DPF. Each listing is matched to a body style and gearbox. For other models, see the \u003ca href=\"\/collections\/audi-performance-exhaust-systems\"\u003eMilltek Audi range\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"milltek-cat-back-exhaust-audi-a5-cabriolet-2-0-tfsi-2wd-quattro-manual-09","title":"Milltek Cat Back Exhaust Audi A5 Cabriolet 2.0 TFSI 2WD Quattro manual 09+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (Tiptronic only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Manual (2009 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 3.0 TDi (DPF) quattro, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires lower spoiler and detailing strip from the S5 3.0T Cabriolet. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer. Some versions: Quad-outlet. Requires lower spoiler and detailing strip from the S5 3.0T Cabriolet. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392675459457,"sku":"MIL-SSXAU660","price":1760.14,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392675492225,"sku":"MIL-SSXAU439","price":1634.79,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392675524993,"sku":"MIL-SSXAU243","price":1571.6,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392675557761,"sku":"MIL-SSXAU242","price":1592.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU660_1_67cacfaf-cd75-4aaf-8aeb-df68d61e2ce2.jpg?v=1791890473"},{"product_id":"milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09","title":"Milltek Cat Back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 3.0 TDi (DPF) quattro (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Cabriolet 3.0 TDi (DPF) quattro. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Dual, Quad), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-100 Polished, GT-100 Cerakote Black, GT-80 Cerakote Black, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 3.0 TDi (DPF) quattro (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé 3.0 TDi (DPF) quattro (2007 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-2-0-tfsi-2wd-quattro-manual-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 2.0 TFSI 2WD Quattro manual 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Quad-outlet. Requires S-Line rear bumper in addition to lower spoiler and detailing strip from the S5. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-100 Polished, GT-100 Cerakote Black, GT-80 Cerakote Black, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé 3.0 TDi (DPF) quattro as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-2-0-tfsi-2wd-quattro-manual-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 2.0 TFSI 2WD Quattro manual 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-100 Polished \/ Twin","offer_id":56392675590529,"sku":"MIL-SSXAU273","price":1166.56,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392675623297,"sku":"MIL-SSXAU440","price":1229.75,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392675656065,"sku":"MIL-SSXAU663","price":1355.11,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392675688833,"sku":"MIL-SSXAU274","price":1187.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU273_1.jpg?v=1791890476"},{"product_id":"milltek-cat-back-exhaust-audi-a5-coupe-2-0-tdi-07","title":"Milltek Cat Back Exhaust Audi A5 Coupé 2.0 TDi 07+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A4 2.0 TDi B8 140PS\/177PS 2WD Saloon and Avant (S line models only) (2009-2011) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Coupé 2.0 TDi. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 2.0 TDi B8 140PS\/177PS 2WD Saloon and Avant (S line models only) (2009-2011)\u003c\/li\u003e\n\u003cli\u003eAudi A4 2.0 TDi B8 177PS quattro Saloon and Avant (2009-2011)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé 2.0 TDi (2007 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e; the Audi A4 2.0 TFSI S line B8 (2WD and quattro Tiptronic-only) Saloon \u0026amp; Avant, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-tiptronic-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD Quattro Tiptronic Saloon Avant 08-11\u003c\/a\u003e; the Audi A4 2.0 TFSI B9 Quattro Saloon \u0026amp; Avant (Non OPF\/GPF Models inc Mild Hybrid \u0026amp; Without Brace Bars), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-b9-quattro-saloon-avant-non-opf-gpf-16\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI B9 Quattro Saloon \u0026amp; Avant Non OPF\/GPF 16+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad Outlet. Requires S4 3.0T lower spoiler and detailing strip. Some versions: Dual-outlet (Must be fitted with a dual outlet S-Line Rear bumper and Valance). Some versions: Dual-outlet. Cerakote Black Tips (Must be fitted with S-Line rear bumper and dual outlet valance). Some versions: Quad-outlet. Requires S-Line rear bumper in addition to lower spoiler and detailing strip from the S5. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A4 2.0 TDi B8 177PS quattro Saloon and Avant?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A4 2.0 TDi B8 177PS quattro Saloon and Avant as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392675918209,"sku":"MIL-SSXAU664","price":1355.11,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392675950977,"sku":"MIL-SSXAU298","price":1166.56,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392675983745,"sku":"MIL-SSXAU437","price":1229.75,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676016513,"sku":"MIL-SSXAU299","price":1187.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU664_1.jpg?v=1791890477"},{"product_id":"milltek-cat-back-exhaust-audi-a5-coupe-3-0-tdi-dpf-quattro-07","title":"Milltek Cat Back Exhaust Audi A5 Coupé 3.0 TDi DPF Quattro 07+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 3.0 TDi (DPF) quattro (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Coupé 3.0 TDi (DPF) quattro. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 3.0 TDi (DPF) quattro (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé 3.0 TDi (DPF) quattro (2007 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-2-0-tfsi-2wd-quattro-manual-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 2.0 TFSI 2WD Quattro manual 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad Outlet. Requires S-Line rear bumper in addition to lower spoiler and detailing strip from the S5. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. Some versions: Quad-outlet. Requires S-Line rear bumper in addition to lower spoiler and detailing strip from the S5. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé 3.0 TDi (DPF) quattro as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-2-0-tfsi-2wd-quattro-manual-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 2.0 TFSI 2WD Quattro manual 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392676049281,"sku":"MIL-SSXAU663","price":1355.11,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392676082049,"sku":"MIL-SSXAU273","price":1166.56,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392676114817,"sku":"MIL-SSXAU440","price":1229.75,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676147585,"sku":"MIL-SSXAU274","price":1187.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU663_1.jpg?v=1791890480"},{"product_id":"milltek-cat-back-exhaust-audi-a5-coupe-s-line-2-0-tfsi-2wd-quattro-manual-08","title":"Milltek Cat Back Exhaust Audi A5 Coupé S line 2.0 TFSI 2WD Quattro manual 08+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (Tiptronic only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Manual (2009 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 3.0 TDi (DPF) quattro, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires lower spoiler and detailing strip from the S5 3.0T Cabriolet. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer. Some versions: Dual-outlet. Cerakote Black Tips. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Dual-outlet. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Quad-outlet. Requires lower spoiler and detailing strip from the S5 4.2 V8. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. S line models only. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392676245889,"sku":"MIL-SSXAU660","price":1760.14,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392676278657,"sku":"MIL-SSXAU439","price":1634.79,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392676311425,"sku":"MIL-SSXAU243","price":1571.6,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676344193,"sku":"MIL-SSXAU242","price":1592.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU660_1.jpg?v=1791890489"},{"product_id":"milltek-cat-back-exhaust-audi-a5-coupe-s-line-2-0-tfsi-2wd-quattro-tiptronic-08","title":"Milltek Cat Back Exhaust Audi A5 Coupé S line 2.0 TFSI 2WD Quattro Tiptronic 08+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (Tiptronic only). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (Tiptronic only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Manual (2009 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 3.0 TDi (DPF) quattro, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires lower spoiler and detailing strip from the S5 3.0T Cabriolet. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer. Some versions: Dual-outlet. Cerakote Black Tips. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Dual-outlet. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Quad-outlet. Requires lower spoiler and detailing strip from the S5 4.2 V8. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. S line models only. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392676442497,"sku":"MIL-SSXAU660","price":1760.14,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392676475265,"sku":"MIL-SSXAU439","price":1634.79,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392676508033,"sku":"MIL-SSXAU243","price":1571.6,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676540801,"sku":"MIL-SSXAU242","price":1592.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU660_1_facf8185-0d49-4202-a776-68433aa60045.jpg?v=1791890491"},{"product_id":"milltek-cat-back-exhaust-audi-a5-coupe-s-line-2-0-tfsi-2wd-quattro-s-tronic-08","title":"Milltek Cat Back Exhaust Audi A5 Coupé S line 2.0 TFSI 2WD Quattro S tronic 08+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A4 2.0 TFSI S line B8 (2WD and quattro Tiptronic-only) Saloon \u0026amp; Avant (2008-2011) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved versions available\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 2.0 TFSI S line B8 (2WD and quattro Tiptronic-only) Saloon \u0026amp; Avant (2008-2011)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Multitronic\/S tronic (2009-2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e; the Audi A4 2.0 TFSI B7 quattro and DTM, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-b7-quattro-dtm-05-08\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI B7 Quattro DTM 05-08\u003c\/a\u003e; the Audi A4 2.0 TDi B8 140PS\/177PS 2WD Saloon and Avant (S line models only), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tdi-b8-140-177ps-2wd-saloon-avant-s-line-09-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TDi B8 140-177PS 2WD Saloon \u0026amp; Avant S line 09-11\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires S4 3.0T lower spoiler and detailing strip. Some versions: Dual-outlet. Cerakote Black Tips. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Dual-outlet. Requires A5 3.2 S line dual outlet valance. S line models only. Some versions: Quad-outlet. Requires lower spoiler and detailing strip from the S5 4.2 V8. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. S line models only. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eSome versions are EC approved; check the EC Approved line in the specification for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392676573569,"sku":"MIL-SSXAU665","price":1763.15,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392676606337,"sku":"MIL-SSXAU436","price":1637.78,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392676639105,"sku":"MIL-SSXAU302","price":1574.6,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676671873,"sku":"MIL-SSXAU303","price":1595.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU665_1_9b6ba009-7dba-4574-a2ec-334d3c4aad33.jpg?v=1791890493"},{"product_id":"milltek-cat-back-exhaust-audi-a5-sportback-2-0-tfsi-2wd-quattro-manual-09","title":"Milltek Cat Back Exhaust Audi A5 Sportback 2.0 TFSI 2WD Quattro Manual 09+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Sportback 2.0 TFSI 2WD and quattro Manual. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 3 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 3 tailpipe finishes: GT-80 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved versions available\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A5 Cabriolet 2.0 TFSI 2WD and quattro (manual only) (2009 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro (Tiptronic only) (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Manual (2009 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A5 Cabriolet 3.0 TDi (DPF) quattro, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires lower spoiler and detailing strip from the S5 3.0T Cabriolet. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer. Some versions: Quad-outlet. Requires lower spoiler and detailing strip from the S5 4.2 V8. 2009-2012 models need part numbers 8T0 807 521B 1RR and 8T0 807 791 2ZZ. 2012 and later facelift models need part numbers 8T8 807 521 01C and 8T0 807 791 B 1RR. These parts are available from your local Audi dealer for approximately £100 +VAT. S line models only -- EC Approved. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro (manual only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A5 Cabriolet 3.0 TDi (DPF) quattro?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a5-cabriolet-3-0-tdi-dpf-quattro-09\"\u003eMilltek Cat-back Exhaust Audi A5 Cabriolet 3.0 TDi DPF Quattro 09+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eSome versions are EC approved; check the EC Approved line in the specification for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392676802945,"sku":"MIL-SSXAU660","price":1760.14,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392676835713,"sku":"MIL-SSXAU318","price":1576.44,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392676868481,"sku":"MIL-SSXAU242","price":1592.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU660_1_2263a4f7-d964-41b0-a1fe-8f7c257310ce.jpg?v=1791890494"},{"product_id":"milltek-cat-back-exhaust-audi-a5-sportback-2-0-tfsi-2wd-quattro-multitronic-s-tronic-09-12","title":"Milltek Cat Back Exhaust Audi A5 Sportback 2.0 TFSI 2WD Quattro Multitronic S tronic 09-12","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A4 2.0 TFSI S line B8 (2WD and quattro Tiptronic-only) Saloon \u0026amp; Avant (2008-2011) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Sportback 2.0 TFSI 2WD and quattro Multitronic\/S tronic. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 4 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 4 tailpipe finishes: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 2.0 TFSI S line B8 (2WD and quattro Tiptronic-only) Saloon \u0026amp; Avant (2008-2011)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic (2008 onwards)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 2.0 TFSI 2WD and quattro Multitronic\/S tronic (2009-2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e; the Audi A4 2.0 TFSI B7 quattro and DTM, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-b7-quattro-dtm-05-08\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI B7 Quattro DTM 05-08\u003c\/a\u003e; the Audi A4 2.0 TDi B8 140PS\/177PS 2WD Saloon and Avant (S line models only), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tdi-b8-140-177ps-2wd-saloon-avant-s-line-09-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TDi B8 140-177PS 2WD Saloon \u0026amp; Avant S line 09-11\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad-outlet. Requires S4 3.0T lower spoiler and detailing strip. Some versions: Quad-outlet. Requires S5 Sportback lower valance (S-line model only). We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Polished, GT-100 Cerakote Black, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Coupé S line 2.0 TFSI 2WD and quattro S tronic as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A4 2.0 TFSI S line B8 (2WD and quattro manual-only) Saloon \u0026amp; Avant?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-2-0-tfsi-s-line-b8-2wd-quattro-manual-saloon-avant-08-11\"\u003eMilltek Cat-back Exhaust Audi A4 2.0 TFSI S line B8 2WD \u0026amp; Quattro manual Saloon \u0026amp; Avant 08-11\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392677097857,"sku":"MIL-SSXAU665","price":1763.15,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392677130625,"sku":"MIL-SSXAU317","price":1579.45,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Cerakote Black \/ Twin","offer_id":56392677163393,"sku":"MIL-SSXAU436","price":1637.78,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392677196161,"sku":"MIL-SSXAU303","price":1595.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU665_1_36cef10d-3f9f-49ab-b88a-b3ab07086777.jpg?v=1791890505"},{"product_id":"milltek-cat-back-exhaust-audi-a5-sportback-3-0-tdi-quattro-manual-multitronic-s-tronic-09","title":"Milltek Cat Back Exhaust Audi A5 Sportback 3.0 TDI Quattro Manual Multitronic S tronic 09+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Audi A4 3.0 TDi B8 quattro Saloon and Avant (2008-2011) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Audi A5 Sportback 3.0 TDI quattro Manual\/Multitronic\/S tronic. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 3 tailpipe finishes and a choice of outlet (Quad, Dual), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 3 tailpipe finishes: GT-80 Cerakote Black, GT-100 Polished, GT-80 Polished\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 3.0 TDi B8 quattro Saloon and Avant (2008-2011)\u003c\/li\u003e\n\u003cli\u003eAudi A5 Sportback 3.0 TDI quattro Manual\/Multitronic\/S tronic (2009 onwards)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every version fits every car in this list. Check the fitment shown for the option you select.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Audi A4 3.0 V6 B6 quattro Saloon Avant \u0026amp; Cabriolet, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-3-0-v6-b6-quattro-saloon-avant-cabriolet-01-05\"\u003eMilltek Cat-back Exhaust Audi A4 3.0 V6 B6 Quattro Saloon Avant Cabriolet 01-05\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Cerakote Black Quad Outlet. Requires S-Line rear bumper in addition to S4 3.0T lower spoiler (part # 8K0 807 521 B 1RR) and detailing strip (part # 8T0 807 791 2ZZ) - approximately £100+VAT - from your local Audi dealer. Some versions: Quad-outlet. Requires S5 Sportback rear valance. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-80 Cerakote Black, GT-100 Polished, GT-80 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Audi A5 Sportback 3.0 TDI quattro Manual\/Multitronic\/S tronic?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Audi A5 Sportback 3.0 TDI quattro Manual\/Multitronic\/S tronic as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Audi A4 3.0 V6 B6 quattro Saloon Avant \u0026amp; Cabriolet?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-audi-a4-3-0-v6-b6-quattro-saloon-avant-cabriolet-01-05\"\u003eMilltek Cat-back Exhaust Audi A4 3.0 V6 B6 Quattro Saloon Avant Cabriolet 01-05\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-80 Cerakote Black \/ Quad","offer_id":56392677261697,"sku":"MIL-SSXAU662","price":1355.11,"currency_code":"GBP","in_stock":true},{"title":"GT-100 Polished \/ Twin","offer_id":56392677294465,"sku":"MIL-SSXAU324","price":1171.41,"currency_code":"GBP","in_stock":true},{"title":"GT-80 Polished \/ Quad","offer_id":56392677327233,"sku":"MIL-SSXAU271","price":1187.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXAU662_1_36d293ea-cd0a-4ec0-99a9-0302abb4d0c1.jpg?v=1791890507"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/collections\/audi-a5.jpg?v=1791897478","url":"https:\/\/milltekexhaustshop.com\/collections\/audi-a5-performance-exhaust-systems.oembed","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}