{"title":"Milltek Ford Puma ST Performance Exhaust Systems","description":"\u003cp\u003eMilltek parts for both versions of the Puma ST: the 1.5 EcoBoost 200PS (2020-23) and the later 1.0 170PS (2023 on). Each has a particulate filter-back system and Active Valve Control, and the 1.5 also has a downpipe and a GPF\/OPF bypass. See the whole \u003ca href=\"\/collections\/ford-performance-exhaust-systems\"\u003eMilltek Ford range\u003c\/a\u003e for other models.\u003c\/p\u003e","products":[{"product_id":"milltek-active-valve-control-ford-puma-st-1-0-170ps-opf-gpf-23","title":"Milltek Active Valve Control Ford Puma ST 1.0 170PS OPF\/GPF 23+","description":"\u003ch2\u003eMilltek Active Valve Control for Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards) – Switchable Exhaust Volume\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's active valve control system for the Ford Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles). It adds an electronically-operated valve to an existing Milltek system, opening a second, less restrictive path through the silencer that stays closed for a refined, near-standard tone around town and opens under load or at the press of a button for a louder, more open sound.\u003c\/p\u003e\n\u003cp\u003eIt's the option to go for if you want the flexibility to keep the car quiet for early starts and long motorway runs, then switch to the full exhaust note whenever you actually want to hear it, without swapping any hardware.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Active Valve Control\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018-2020)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis involves connecting to the car's wiring and exhaust valves, so we recommend fitting by a specialist familiar with the car's electrics.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-downpipe-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Downpipe Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-gpf-opf-bypass-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek GPF\/OPF Bypass Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-cat-back-exhaust-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Cat-back Exhaust Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eHow is it controlled?\u003c\/h3\u003e\n\u003cp\u003eDepending on the version, it is controlled using a remote control.\u003c\/p\u003e\n\u003ch3\u003eWill the car be louder all the time?\u003c\/h3\u003e\n\u003cp\u003eNo. With the valve closed the tone stays close to standard; open it when you want the full exhaust note.\u003c\/p\u003e\n\u003ch3\u003eWhat does it work with?\u003c\/h3\u003e\n\u003cp\u003eMilltek notes: \"Plug \u0026amp; Play Remote Control System for OE \u0026amp; Milltek Sport Exhausts\". Check this matches your current exhaust before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs this a complete exhaust system?\u003c\/h3\u003e\n\u003cp\u003eNo. It is designed to be used with the system or factory parts described above, rather than as a complete exhaust on its own.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392816460161,"sku":"MIL-SSXFD413","price":292.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD413_1_13d4b788-c539-4239-994c-bbb8e7505c50.jpg?v=1791893067"},{"product_id":"milltek-active-valve-control-ford-puma-st-1-5-200ps-ecoboost-opf-gpf-20-23","title":"Milltek Active Valve Control Ford Puma ST 1.5 200ps EcoBoost OPF\/GPF 20-23","description":"\u003ch2\u003eMilltek Active Valve Control for Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards) – Switchable Exhaust Volume\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's active valve control system for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped). It adds an electronically-operated valve to an existing Milltek system, opening a second, less restrictive path through the silencer that stays closed for a refined, near-standard tone around town and opens under load or at the press of a button for a louder, more open sound.\u003c\/p\u003e\n\u003cp\u003eIt's the option to go for if you want the flexibility to keep the car quiet for early starts and long motorway runs, then switch to the full exhaust note whenever you actually want to hear it, without swapping any hardware.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Active Valve Control\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018-2020)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis involves connecting to the car's wiring and exhaust valves, so we recommend fitting by a specialist familiar with the car's electrics.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-downpipe-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Downpipe Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-gpf-opf-bypass-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek GPF\/OPF Bypass Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-cat-back-exhaust-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Cat-back Exhaust Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eHow is it controlled?\u003c\/h3\u003e\n\u003cp\u003eDepending on the version, it is controlled using a remote control.\u003c\/p\u003e\n\u003ch3\u003eWill the car be louder all the time?\u003c\/h3\u003e\n\u003cp\u003eNo. With the valve closed the tone stays close to standard; open it when you want the full exhaust note.\u003c\/p\u003e\n\u003ch3\u003eWhat does it work with?\u003c\/h3\u003e\n\u003cp\u003eMilltek notes: \"Plug \u0026amp; Play Remote Control System for OE \u0026amp; Milltek Sport Exhausts\". Check this matches your current exhaust before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs this a complete exhaust system?\u003c\/h3\u003e\n\u003cp\u003eNo. It is designed to be used with the system or factory parts described above, rather than as a complete exhaust on its own.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392816689537,"sku":"MIL-SSXFD413","price":292.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD413_1.jpg?v=1791893074"},{"product_id":"milltek-filter-back-exhaust-ford-puma-st-1-0-170ps-opf-gpf-23","title":"Milltek Filter Back Exhaust Ford Puma ST 1.0 170PS OPF\/GPF 23+","description":"\u003ch2\u003eMilltek Filter-back Exhaust for Ford Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards) – Sharper Sound, Filter Retained\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's particulate filter-back system for the Ford Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles). It replaces everything downstream of the factory diesel or petrol particulate filter with wider-bore pipework and re-tuned silencers, cutting back pressure and sharpening the exhaust note. The filter itself is left exactly where the manufacturer fitted it, so emissions equipment is unaffected. It's offered in 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's the right choice if you want a sportier sound and a genuine, if modest, flow improvement on a filter-equipped car, without going anywhere near the parts of the system that keep it emissions-compliant.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Particulate Filter-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 1 to 1.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eFits behind the factory particulate filter, which stays in place\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-90 Brushed Titanium, GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 1 to 1.5 hours. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-90 Brushed Titanium, GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory particulate filter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory particulate filter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory particulate filter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 1 to 1.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-90 Brushed Titanium","offer_id":56392816722305,"sku":"MIL-SSXFD353","price":1249.19,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Burnt Titanium","offer_id":56392816755073,"sku":"MIL-SSXFD354","price":1338.38,"currency_code":"GBP","in_stock":true},{"title":"JET-90 Carbon Fibre","offer_id":56392816787841,"sku":"MIL-SSXFD355","price":1137.22,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Cerakote Black","offer_id":56392816820609,"sku":"MIL-SSXFD352","price":1111.64,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Polished","offer_id":56392816853377,"sku":"MIL-SSXFD351","price":1026.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD353_1.jpg?v=1791893082"},{"product_id":"milltek-downpipe-ford-puma-st-1-5-200ps-ecoboost-opf-gpf-20-23","title":"Milltek Downpipe Ford Puma ST 1.5 200ps EcoBoost OPF\/GPF 20-23","description":"\u003ch2\u003eMilltek Downpipe for Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards) – Improved Turbo Flow\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's downpipe for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped). It replaces the factory downpipe with a less restrictive design for improved flow at one of the most restrictive points in the system. Check the specification below to see whether this particular version retains a catalyst. It's offered in a choice of cat (De-cat with GPF Delete, GPF Delete), so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Downpipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 80mm (3.15\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 2.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e80mm (3.15\") pipework\u003c\/li\u003e\n\u003cli\u003eLarger, less restrictive downpipe improves flow from the turbo outlet\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018-2020)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 2.5 hours. Some versions: 80mm Decat Downpipe - Fits to Milltek Sport GPF Delete Only - Requires Stage 2 ECU Remap. Some versions: 80mm Downpipe with 200CPSI High Flow Sports Cat - Fits to Milltek Sport GPF Delete Only - Requires Stage 2 ECU Remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-active-valve-control-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Active Valve Control Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-gpf-opf-bypass-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek GPF\/OPF Bypass Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-cat-back-exhaust-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Cat-back Exhaust Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eA suitable remap is strongly recommended, as the engine management needs to account for the change in flow and sensor readings. Speak to your tuner before fitting.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 2.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"De-cat with GPF Delete","offer_id":56392816984449,"sku":"MIL-SSXFD334","price":347.99,"currency_code":"GBP","in_stock":true},{"title":"GPF Delete","offer_id":56392817017217,"sku":"MIL-SSXFD333","price":760.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD334_1_5fb3f2a2-8af7-4b9b-8f80-555ae0b79636.jpg?v=1791893077"},{"product_id":"milltek-gpf-opf-bypass-ford-puma-st-1-5-200ps-ecoboost-opf-gpf-20-23","title":"Milltek GPF\/OPF Bypass Ford Puma ST 1.5 200ps EcoBoost OPF\/GPF 20-23","description":"\u003ch2\u003eMilltek GPF\/OPF Bypass for Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards) – Filter Delete, Motorsport Use\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's GPF\/OPF bypass pipe for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped). It replaces the section of pipe housing the factory petrol particulate filter with a straight-through pipe, clearing the last major restriction left in a modern turbocharged petrol exhaust once a de-cat and remap are already in place. It's offered in non-resonated or resonated versions and versions to suit the factory or a Milltek system, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners already running a de-cat and a supporting remap who want to clear the final restriction in the system, not a bolt-on for a car that needs to stay road legal.\u003c\/p\u003e\n\u003cp\u003eBecause it removes the particulate filter, it's intended for off-road and competition use. A car with the GPF\/OPF removed will fail an MOT emissions test and isn't legal to use on UK roads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e GPF\/OPF Bypass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eStraight-through pipe in place of the factory petrol particulate filter (off-road and competition use only)\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018-2020)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSome versions: GPF\/OPF Bypass Non-Resonated for Fitment to Milltek Sport Cat Back Only. Some versions: GPF\/OPF Bypass Non-Resonated for Fitment to OE Cat Back Only (OE system requires to be cut). Some versions: GPF\/OPF Bypass Resonated for Fitment to Milltek Sport Cat Back Only. Some versions: GPF\/OPF Bypass Resonated for Fitment to OE Cat Back Only (OE system requires to be cut). This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-active-valve-control-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Active Valve Control Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-downpipe-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Downpipe Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e, \u003ca href=\"\/products\/milltek-cat-back-exhaust-ford-fiesta-mk8-mk8-5-st-1-5-ecoboost-200ps-post-sept-2020-20\"\u003eMilltek Cat-back Exhaust Ford Fiesta Mk8 \u0026amp; Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eNo. Removing the particulate filter means the car will fail an MOT emissions test, so it is for off-road and competition use only.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eA suitable remap is strongly recommended, as the engine management needs to account for the change in flow and sensor readings. Speak to your tuner before fitting.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated \/ Fits Milltek Cat Back Only","offer_id":56392817246593,"sku":"MIL-SSXFD273","price":260.37,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ Fits OE System Only","offer_id":56392817279361,"sku":"MIL-SSXFD272","price":270.66,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ Fits Milltek Cat Back Only","offer_id":56392817312129,"sku":"MIL-SSXFD275","price":357.03,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ Fits OE System Only","offer_id":56392817344897,"sku":"MIL-SSXFD274","price":367.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD273_1_b793bb25-2862-46e4-b50e-e5666c7af3a1.jpg?v=1791893090"},{"product_id":"milltek-filter-back-exhaust-ford-puma-st-1-5-200ps-ecoboost-opf-gpf-20-23","title":"Milltek Filter Back Exhaust Ford Puma ST 1.5 200ps EcoBoost OPF\/GPF 20-23","description":"\u003ch2\u003eMilltek Filter-back Exhaust for Ford Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards) – Sharper Sound, Filter Retained\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's particulate filter-back system for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped). It replaces everything downstream of the factory diesel or petrol particulate filter with wider-bore pipework and re-tuned silencers, cutting back pressure and sharpening the exhaust note. The filter itself is left exactly where the manufacturer fitted it, so emissions equipment is unaffected. It's offered in 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's the right choice if you want a sportier sound and a genuine, if modest, flow improvement on a filter-equipped car, without going anywhere near the parts of the system that keep it emissions-compliant.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Particulate Filter-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 1 to 1.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eFits behind the factory particulate filter, which stays in place\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-90 Brushed Titanium, GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Puma ST 1.0 170PS (OPF\/GPF Equipped Vehicles) (2023 onwards)\u003c\/li\u003e\n\u003cli\u003eFord Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) (2020-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 1 to 1.5 hours. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-90 Brushed Titanium, GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped)?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the Ford Puma ST 1.5 200ps EcoBoost (OPF\/GPF Equipped) as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory particulate filter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory particulate filter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory particulate filter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 1 to 1.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-90 Brushed Titanium","offer_id":56392817410433,"sku":"MIL-SSXFD353","price":1249.19,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Burnt Titanium","offer_id":56392817443201,"sku":"MIL-SSXFD354","price":1338.38,"currency_code":"GBP","in_stock":true},{"title":"JET-90 Carbon Fibre","offer_id":56392817475969,"sku":"MIL-SSXFD355","price":1137.22,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Cerakote Black","offer_id":56392817508737,"sku":"MIL-SSXFD352","price":1111.64,"currency_code":"GBP","in_stock":true},{"title":"GT-90 Polished","offer_id":56392817541505,"sku":"MIL-SSXFD351","price":1026.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXFD353_1_9e31d283-feb1-4c46-b91b-d4b39fe62df3.jpg?v=1791893094"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/collections\/ford-puma-st.jpg?v=1791897697","url":"https:\/\/milltekexhaustshop.com\/collections\/ford-puma-st-performance-exhaust-systems.oembed","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}