{"title":"Milltek Jeep Performance Exhaust Systems","description":"\u003cp\u003eMilltek Sport cat-back exhausts for the Jeep \u003ca href=\"\/collections\/jeep-wrangler-performance-exhaust-systems\"\u003eWrangler\u003c\/a\u003e JL and JLU and the \u003ca href=\"\/collections\/jeep-gladiator-performance-exhaust-systems\"\u003eGladiator\u003c\/a\u003e JT, all with the 3.6 V6. The Wrangler has separate systems for 2-door and 4-door models from 2019 (not the 4xe plug-in hybrid), offered resonated or non-resonated with GT-100 tips or a High Clearance option. The Gladiator pickup from 2020 has a system with a rear or side exit and GT-115 or JET-115 tips. Each is made from T304L stainless steel; see our \u003ca href=\"\/pages\/milltek-exhaust-tip-styles\"\u003etip styles\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"milltek-cat-back-exhaust-jeep-gladiator-jt-3-6-v6-20","title":"Milltek Cat Back Exhaust Jeep Gladiator JT 3.6 V6 20+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Jeep Gladiator (JT) 3.6 V6 (2020 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Jeep Gladiator (JT) 3.6 V6. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 1.5 to 2.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-115 Brushed Titanium, GT-115 Burnt Titanium, GT-115 Cerakote Black, GT-115 Polished, JET-115 Carbon Fibre\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eJeep Gladiator (JT) 3.6 V6 (2020 onwards)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 1.5 to 2.5 hours. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-115 Brushed Titanium, GT-115 Burnt Titanium, GT-115 Cerakote Black, GT-115 Polished, JET-115 Carbon Fibre. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 1.5 to 2.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"GT-115 Brushed Titanium \/ Rear Exit","offer_id":56392831369601,"sku":"MIL-SSXJP108","price":1905.49,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Burnt Titanium \/ Rear Exit","offer_id":56392831402369,"sku":"MIL-SSXJP109","price":1968.64,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Cerakote Black \/ Rear Exit","offer_id":56392831435137,"sku":"MIL-SSXJP107","price":1785.78,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Polished \/ Rear Exit","offer_id":56392831467905,"sku":"MIL-SSXJP106","price":1641.02,"currency_code":"GBP","in_stock":true},{"title":"JET-115 Carbon Fibre \/ Rear Exit","offer_id":56392831500673,"sku":"MIL-SSXJP110","price":1934.92,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Brushed Titanium \/ Side Exit","offer_id":56392831533441,"sku":"MIL-SSXJP103","price":1870.43,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Burnt Titanium \/ Side Exit","offer_id":56392831566209,"sku":"MIL-SSXJP104","price":1933.59,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Cerakote Black \/ Side Exit","offer_id":56392831598977,"sku":"MIL-SSXJP102","price":1750.73,"currency_code":"GBP","in_stock":true},{"title":"GT-115 Polished \/ Side Exit","offer_id":56392831631745,"sku":"MIL-SSXJP101","price":1605.96,"currency_code":"GBP","in_stock":true},{"title":"JET-115 Carbon Fibre \/ Side Exit","offer_id":56392831664513,"sku":"MIL-SSXJP105","price":1899.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXJP108_1.jpg?v=1791893385"},{"product_id":"milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-2dr-excluding-4xe-19","title":"Milltek Cat Back Exhaust Jeep Wrangler JL JLU 3.6 V6 2dr Excluding 4Xe 19+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Jeep Wrangler JL\/JLU 3.6 V6 2 Door Models (Excluding 4Xe) (2019 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Jeep Wrangler JL\/JLU 3.6 V6 2 Door Models (Excluding 4Xe). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in non-resonated or resonated versions and 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-100 Brushed Titanium, GT-100 Burnt Titanium, GT-100 Cerakote Black, High Clearance, GT-100 Polished\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eJeep Wrangler JL\/JLU 3.6 V6 2 Door Models (Excluding 4Xe) (2019 onwards)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Jeep Wrangler JL\/JLU 3.6 V6 4 Door Models (Excluding 4Xe), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-4dr-excluding-4xe-19\"\u003eMilltek Cat-back Exhaust Jeep Wrangler JL \u0026amp; JLU 3.6 V6 4dr Excluding 4Xe 19+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-100 Brushed Titanium, GT-100 Burnt Titanium, GT-100 Cerakote Black, High Clearance, GT-100 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Jeep Wrangler JL\/JLU 3.6 V6 4 Door Models (Excluding 4Xe)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-4dr-excluding-4xe-19\"\u003eMilltek Cat-back Exhaust Jeep Wrangler JL \u0026amp; JLU 3.6 V6 4dr Excluding 4Xe 19+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated \/ GT-100 Brushed Titanium","offer_id":56392831893889,"sku":"MIL-SSXJP114","price":1285.36,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Burnt Titanium","offer_id":56392831926657,"sku":"MIL-SSXJP115","price":1354.85,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Cerakote Black","offer_id":56392831959425,"sku":"MIL-SSXJP113","price":1179.89,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ High Clearance","offer_id":56392831992193,"sku":"MIL-SSXJP111","price":864.41,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Polished","offer_id":56392832024961,"sku":"MIL-SSXJP112","price":1098.63,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Brushed Titanium","offer_id":56392832057729,"sku":"MIL-SSXJP119","price":1406.85,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Burnt Titanium","offer_id":56392832090497,"sku":"MIL-SSXJP120","price":1476.34,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Cerakote Black","offer_id":56392832123265,"sku":"MIL-SSXJP118","price":1301.38,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ High Clearance","offer_id":56392832156033,"sku":"MIL-SSXJP116","price":985.9,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Polished","offer_id":56392832188801,"sku":"MIL-SSXJP117","price":1220.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXJP114_1.jpg?v=1791893401"},{"product_id":"milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-4dr-excluding-4xe-19","title":"Milltek Cat Back Exhaust Jeep Wrangler JL JLU 3.6 V6 4dr Excluding 4Xe 19+","description":"\u003ch2\u003eMilltek Cat-back Exhaust for Jeep Wrangler JL\/JLU 3.6 V6 4 Door Models (Excluding 4Xe) (2019 onwards) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the Jeep Wrangler JL\/JLU 3.6 V6 4 Door Models (Excluding 4Xe). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in non-resonated or resonated versions and 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-100 Brushed Titanium, GT-100 Burnt Titanium, GT-100 Cerakote Black, High Clearance, GT-100 Polished\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eJeep Wrangler JL\/JLU 3.6 V6 4 Door Models (Excluding 4Xe) (2019 onwards)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Jeep Wrangler JL\/JLU 3.6 V6 2 Door Models (Excluding 4Xe), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-2dr-excluding-4xe-19\"\u003eMilltek Cat-back Exhaust Jeep Wrangler JL \u0026amp; JLU 3.6 V6 2dr Excluding 4Xe 19+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-100 Brushed Titanium, GT-100 Burnt Titanium, GT-100 Cerakote Black, High Clearance, GT-100 Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Jeep Wrangler JL\/JLU 3.6 V6 2 Door Models (Excluding 4Xe)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-jeep-wrangler-jl-jlu-3-6-v6-2dr-excluding-4xe-19\"\u003eMilltek Cat-back Exhaust Jeep Wrangler JL \u0026amp; JLU 3.6 V6 2dr Excluding 4Xe 19+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated \/ GT-100 Brushed Titanium","offer_id":56392832254337,"sku":"MIL-SSXJP124","price":1337.92,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Burnt Titanium","offer_id":56392832287105,"sku":"MIL-SSXJP125","price":1407.41,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Cerakote Black","offer_id":56392832319873,"sku":"MIL-SSXJP123","price":1179.89,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ High Clearance","offer_id":56392832352641,"sku":"MIL-SSXJP121","price":916.97,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-100 Polished","offer_id":56392832385409,"sku":"MIL-SSXJP122","price":1151.19,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Brushed Titanium","offer_id":56392832418177,"sku":"MIL-SSXJP129","price":1459.41,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Burnt Titanium","offer_id":56392832450945,"sku":"MIL-SSXJP130","price":1528.9,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Cerakote Black","offer_id":56392832483713,"sku":"MIL-SSXJP128","price":1353.94,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ High Clearance","offer_id":56392832516481,"sku":"MIL-SSXJP126","price":1038.47,"currency_code":"GBP","in_stock":true},{"title":"Resonated \/ GT-100 Polished","offer_id":56392832549249,"sku":"MIL-SSXJP127","price":1272.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXJP124_1.jpg?v=1791893404"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/collections\/jeep.jpg?v=1791892921","url":"https:\/\/milltekexhaustshop.com\/collections\/jeep-performance-exhaust-systems.oembed","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}