{"title":"Milltek Mini Mk1 R50 R52 R53 Performance Exhaust Systems","description":"\u003cp\u003eMilltek's first-generation Mini parts cover the R50 Cooper and One 1.6i (2001-06), the R53 Cooper S (2002-06) and the R52 Cooper S Convertible (2004-08). Every model has a cat-back system and a choice of manifold with a hi-flow sports cat or with a cat bypass, and the Cooper S cars add a full exhaust with sports cat. Later generations are in the \u003ca href=\"\/collections\/mini-performance-exhaust-systems\"\u003eMilltek Mini range\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"milltek-manifold-with-sports-cat-new-mini-mk1-r50-cooper-1-6i-01-06","title":"Milltek Manifold with Sports Cat New Mini Mk1 R50 Cooper 1.6i 01-06","description":"\u003ch2\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Improved Flow, Sports Catalyst\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R50) Cooper 1.6i. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold \u0026amp; Hi-Flow Sports Cat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eHigh-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eHow is a sports cat different from a de-cat?\u003c\/h3\u003e\n\u003cp\u003eA sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392887468417,"sku":"MIL-SSXM460","price":818.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM460_1.jpg?v=1791893835"},{"product_id":"milltek-manifold-inc-cat-bypass-new-mini-mk1-r50-cooper-1-6i-01-06","title":"Milltek Manifold inc Cat Bypass New Mini Mk1 R50 Cooper 1.6i 01-06","description":"\u003ch2\u003eMilltek Manifold including Cat Bypass New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Maximum Flow, Motorsport Use\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe and de-cat for the New Mini Mk1 (R50) Cooper 1.6i. It replaces the factory downpipe with a larger-bore pipe and removes the catalytic converter entirely, clearing the single most restrictive point in the exhaust for the biggest flow gain available at this position in the system. It's usually fitted alongside a Stage 2 remap, since the ECU needs to be told to expect the different readings the lambda sensors give once the cat's gone.\u003c\/p\u003e\n\u003cp\u003eIt's built for owners already committed to a serious power upgrade rather than a casual bolt-on, so pair it with the matching Milltek cat-back system for the full effect.\u003c\/p\u003e\n\u003cp\u003eBecause it removes the cat, it's intended for off-road and competition use. A de-catted car will fail an MOT emissions test and isn't legal to use on UK roads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold (including Cat Bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eRemoves the factory catalyst for maximum flow (off-road and competition use only)\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eNo. Removing the catalyst means the car will fail an MOT emissions test, so it is for off-road and competition use only.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eWill removing the cat cause a warning light?\u003c\/h3\u003e\n\u003cp\u003eWithout suitable software it is likely to, as the ECU expects the readings a working catalyst gives. This is why Milltek pairs it with a remap.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392887566721,"sku":"MIL-SSXM459","price":402.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM459_1.jpg?v=1791893837"},{"product_id":"milltek-manifold-with-sports-cat-new-mini-mk1-r50-one-1-6i-01-06","title":"Milltek Manifold with Sports Cat New Mini Mk1 R50 One 1.6i 01-06","description":"\u003ch2\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Improved Flow, Sports Catalyst\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R50) One 1.6i. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold \u0026amp; Hi-Flow Sports Cat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eHigh-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eHow is a sports cat different from a de-cat?\u003c\/h3\u003e\n\u003cp\u003eA sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392887599489,"sku":"MIL-SSXM460","price":818.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM460_1_6304ca14-8cd0-44e2-b860-b50630e5d7a6.jpg?v=1791893837"},{"product_id":"milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06","title":"Milltek Cat Back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06","description":"\u003ch2\u003eMilltek Cat-back Exhaust New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the New Mini Mk1 (R50) Cooper 1.6i. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 53.98mm (2.13\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e 90mm Jet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e53.98mm (2.13\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R53) Cooper S, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e; the New Mini Mk1 (R52) Cooper S Convertible, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r52-cooper-s-convertible-04-08\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R52 Cooper S Convertible 04-08\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-manifold-with-sports-cat-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R53) Cooper S?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392887632257,"sku":"MIL-SSXM012","price":543.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM012_1.jpg?v=1791893838"},{"product_id":"milltek-manifold-inc-cat-bypass-new-mini-mk1-r50-one-1-6i-01-06","title":"Milltek Manifold inc Cat Bypass New Mini Mk1 R50 One 1.6i 01-06","description":"\u003ch2\u003eMilltek Manifold including Cat Bypass New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Maximum Flow, Motorsport Use\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe and de-cat for the New Mini Mk1 (R50) One 1.6i. It replaces the factory downpipe with a larger-bore pipe and removes the catalytic converter entirely, clearing the single most restrictive point in the exhaust for the biggest flow gain available at this position in the system. It's usually fitted alongside a Stage 2 remap, since the ECU needs to be told to expect the different readings the lambda sensors give once the cat's gone.\u003c\/p\u003e\n\u003cp\u003eIt's built for owners already committed to a serious power upgrade rather than a casual bolt-on, so pair it with the matching Milltek cat-back system for the full effect.\u003c\/p\u003e\n\u003cp\u003eBecause it removes the cat, it's intended for off-road and competition use. A de-catted car will fail an MOT emissions test and isn't legal to use on UK roads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold (including Cat Bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eRemoves the factory catalyst for maximum flow (off-road and competition use only)\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eNo. Removing the catalyst means the car will fail an MOT emissions test, so it is for off-road and competition use only.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eWill removing the cat cause a warning light?\u003c\/h3\u003e\n\u003cp\u003eWithout suitable software it is likely to, as the ECU expects the readings a working catalyst gives. This is why Milltek pairs it with a remap.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392887992705,"sku":"MIL-SSXM459","price":402.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM459_1_66aff0d2-6173-476b-9093-7404f20cd022.jpg?v=1791893845"},{"product_id":"milltek-cat-back-exhaust-new-mini-mk1-r50-one-1-6i-01-06","title":"Milltek Cat Back Exhaust New Mini Mk1 R50 One 1.6i 01-06","description":"\u003ch2\u003eMilltek Cat-back Exhaust New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the New Mini Mk1 (R50) One 1.6i. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 53.98mm (2.13\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e 90mm Jet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e53.98mm (2.13\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R53) Cooper S, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e; the New Mini Mk1 (R52) Cooper S Convertible, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r52-cooper-s-convertible-04-08\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R52 Cooper S Convertible 04-08\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-manifold-with-sports-cat-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R53) Cooper S?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888091009,"sku":"MIL-SSXM012","price":543.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM012_1_a9555bb1-04eb-495b-a671-f13c9a422dbe.jpg?v=1791893846"},{"product_id":"milltek-manifold-with-sports-cat-new-mini-mk1-r52-cooper-s-convertible-04-08","title":"Milltek Manifold with Sports Cat New Mini Mk1 R52 Cooper S Convertible 04-08","description":"\u003ch2\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Improved Flow, Sports Catalyst\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R52) Cooper S Convertible. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold \u0026amp; Hi-Flow Sports Cat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eHigh-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eHow is a sports cat different from a de-cat?\u003c\/h3\u003e\n\u003cp\u003eA sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888189313,"sku":"MIL-SSXM460","price":818.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM460_1_653f7885-fee9-42ee-a161-f65bc62975b5.jpg?v=1791893847"},{"product_id":"milltek-manifold-inc-cat-bypass-new-mini-mk1-r52-cooper-s-convertible-04-08","title":"Milltek Manifold inc Cat Bypass New Mini Mk1 R52 Cooper S Convertible 04-08","description":"\u003ch2\u003eMilltek Manifold including Cat Bypass New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Maximum Flow, Motorsport Use\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe and de-cat for the New Mini Mk1 (R52) Cooper S Convertible. It replaces the factory downpipe with a larger-bore pipe and removes the catalytic converter entirely, clearing the single most restrictive point in the exhaust for the biggest flow gain available at this position in the system. It's usually fitted alongside a Stage 2 remap, since the ECU needs to be told to expect the different readings the lambda sensors give once the cat's gone.\u003c\/p\u003e\n\u003cp\u003eIt's built for owners already committed to a serious power upgrade rather than a casual bolt-on, so pair it with the matching Milltek cat-back system for the full effect.\u003c\/p\u003e\n\u003cp\u003eBecause it removes the cat, it's intended for off-road and competition use. A de-catted car will fail an MOT emissions test and isn't legal to use on UK roads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold (including Cat Bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eRemoves the factory catalyst for maximum flow (off-road and competition use only)\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eNo. Removing the catalyst means the car will fail an MOT emissions test, so it is for off-road and competition use only.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eWill removing the cat cause a warning light?\u003c\/h3\u003e\n\u003cp\u003eWithout suitable software it is likely to, as the ECU expects the readings a working catalyst gives. This is why Milltek pairs it with a remap.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888222081,"sku":"MIL-SSXM459","price":402.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM459_1_cf11d3e8-abc2-408a-9c89-14005e6c4ea9.jpg?v=1791893848"},{"product_id":"milltek-cat-back-exhaust-new-mini-mk1-r52-cooper-s-convertible-04-08","title":"Milltek Cat Back Exhaust New Mini Mk1 R52 Cooper S Convertible 04-08","description":"\u003ch2\u003eMilltek Cat-back Exhaust New for New Mini Mk1 (R52) Cooper S Convertible (2004-2008) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the New Mini Mk1 (R52) Cooper S Convertible. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in non-resonated or resonated EC approved versions, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e Twin 76.2mm Special\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eEC approved versions available\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R53) Cooper S, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e; the New Mini Mk1 (R50) Cooper 1.6i, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R53) Cooper S?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eSome versions are EC approved; check the EC Approved line in the specification for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated","offer_id":56392888582529,"sku":"MIL-SSXM403","price":658.44,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved","offer_id":56392888615297,"sku":"MIL-SSXM008","price":721.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM403_1.jpg?v=1791893857"},{"product_id":"milltek-full-exhaust-with-sports-cat-new-mini-mk1-r52-cooper-s-convertible-04-08","title":"Milltek Full Exhaust with Sports Cat New Mini Mk1 R52 Cooper S Convertible 04-08","description":"\u003ch2\u003eMilltek Full Exhaust \u0026amp; Sports Cat New for New Mini Mk1 (R52) Cooper S Convertible (2004-2008) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R52) Cooper S Convertible. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Full System (including Hi-Flow Sports Cat)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e Twin 76.2mm Special\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R53) Cooper S, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e; the New Mini Mk1 (R50) Cooper 1.6i, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, note: Requires a Stage 2 ECU remap. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R53) Cooper S?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R53 Cooper S 02-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eSome versions do. Milltek notes: \"Requires a Stage 2 ECU remap\". Check the notes for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888648065,"sku":"MIL-SSXM014","price":1540.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM014_1.jpg?v=1791893857"},{"product_id":"milltek-manifold-with-sports-cat-new-mini-mk1-r53-cooper-s-02-06","title":"Milltek Manifold with Sports Cat New Mini Mk1 R53 Cooper S 02-06","description":"\u003ch2\u003eMilltek Manifold \u0026amp; Hi-Flow Sports Cat New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Improved Flow, Sports Catalyst\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R53) Cooper S. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold \u0026amp; Hi-Flow Sports Cat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eHigh-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with Milltek Sport and OE Catback system and requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with Milltek Sport and OE Catback system and requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists it for use with the factory (OE) exhaust system.\u003c\/p\u003e\n\u003ch3\u003eHow is a sports cat different from a de-cat?\u003c\/h3\u003e\n\u003cp\u003eA sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888680833,"sku":"MIL-SSXM460","price":818.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM460_1_f6765eac-7894-4d1f-b747-e4b1696a250c.jpg?v=1791893856"},{"product_id":"milltek-manifold-inc-cat-bypass-new-mini-mk1-r53-cooper-s-02-06","title":"Milltek Manifold inc Cat Bypass New Mini Mk1 R53 Cooper S 02-06","description":"\u003ch2\u003eMilltek Manifold including Cat Bypass New for New Mini Mk1 (R50) Cooper 1.6i (2001-2006) – Maximum Flow, Motorsport Use\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe and de-cat for the New Mini Mk1 (R53) Cooper S. It replaces the factory downpipe with a larger-bore pipe and removes the catalytic converter entirely, clearing the single most restrictive point in the exhaust for the biggest flow gain available at this position in the system. It's usually fitted alongside a Stage 2 remap, since the ECU needs to be told to expect the different readings the lambda sensors give once the cat's gone.\u003c\/p\u003e\n\u003cp\u003eIt's built for owners already committed to a serious power upgrade rather than a casual bolt-on, so pair it with the matching Milltek cat-back system for the full effect.\u003c\/p\u003e\n\u003cp\u003eBecause it removes the cat, it's intended for off-road and competition use. A de-catted car will fail an MOT emissions test and isn't legal to use on UK roads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Manifold (including Cat Bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 2 to 3 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eRemoves the factory catalyst for maximum flow (off-road and competition use only)\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk1 (R50) Cooper 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R50) One 1.6i (2001-2006)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R52) Cooper S Convertible (2004-2008)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e any model, engine or body style not listed above. Check your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 2 to 3 hours. Before ordering, note: Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk1 (R50) One 1.6i?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk1 (R50) One 1.6i as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eNo. Removing the catalyst means the car will fail an MOT emissions test, so it is for off-road and competition use only.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"Two Piece Design (Removable Cat\/Decat Section), Fits with OE and Milltek Sport Cat Back - Requires a Stage 2 ECU remap\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eWill removing the cat cause a warning light?\u003c\/h3\u003e\n\u003cp\u003eWithout suitable software it is likely to, as the ECU expects the readings a working catalyst gives. This is why Milltek pairs it with a remap.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 2 to 3 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392888746369,"sku":"MIL-SSXM459","price":402.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM459_1_c996d376-392a-4315-89e1-a236ae4933b9.jpg?v=1791893858"},{"product_id":"milltek-cat-back-exhaust-new-mini-mk1-r53-cooper-s-02-06","title":"Milltek Cat Back Exhaust New Mini Mk1 R53 Cooper S 02-06","description":"\u003ch2\u003eMilltek Cat-back Exhaust New for New Mini Mk1 (R53) Cooper S (2002-2006) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the New Mini Mk1 (R53) Cooper S. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in resonated EC approved or non-resonated versions and 2 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 2 tailpipe finishes: Cerakote Black, Polished\u003c\/li\u003e\n\u003cli\u003eEC approved versions available\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R50) Cooper 1.6i, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e; the New Mini Mk1 (R52) Cooper S Convertible, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r52-cooper-s-convertible-04-08\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R52 Cooper S Convertible 04-08\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWe recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: Cerakote Black, Polished. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R50) Cooper 1.6i?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eSome versions are EC approved; check the EC Approved line in the specification for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Resonated - EC Approved \/ Cerakote Black \/ Loose Trim","offer_id":56392888779137,"sku":"MIL-SSXM478","price":841.5,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ Polished \/ Loose Trim","offer_id":56392888811905,"sku":"MIL-SSXM477","price":783.1,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ Polished \/ Fixed Trim","offer_id":56392888844673,"sku":"MIL-SSXM006","price":717.25,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ Polished \/ Fixed Trim","offer_id":56392888877441,"sku":"MIL-SSXM007","price":653.73,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ Cerakote Black \/ Loose Trim","offer_id":56392888910209,"sku":"MIL-SSXM480","price":777.99,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ Polished \/ Loose Trim","offer_id":56392888942977,"sku":"MIL-SSXM479","price":719.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM478_1.jpg?v=1791893876"},{"product_id":"milltek-full-exhaust-with-sports-cat-new-mini-mk1-r53-cooper-s-02-06","title":"Milltek Full Exhaust with Sports Cat New Mini Mk1 R53 Cooper S 02-06","description":"\u003ch2\u003eMilltek Full Exhaust \u0026amp; Sports Cat New for New Mini Mk1 (R53) Cooper S (2002-2006) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's large-bore downpipe with hi-flow sports cat for the New Mini Mk1 (R53) Cooper S. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it. It's offered in non-resonated or resonated versions, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.\u003c\/p\u003e\n\u003cp\u003eIn the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Full System (including Hi-Flow Sports Cat)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 63.5mm (2.5\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Style:\u003c\/strong\u003e 76.2mm Special\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e63.5mm (2.5\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNew Mini Mk1 (R53) Cooper S (2002-2006)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk1 (R50) Cooper 1.6i, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e; the New Mini Mk1 (R52) Cooper S Convertible, which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r52-cooper-s-convertible-04-08\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R52 Cooper S Convertible 04-08\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe fitting time varies by version; see the specification table for the option you choose. Some versions: Non-resonated (louder). Includes bracket locators for 2004 cars. Requires Stage 2 ECU Remap. Some versions: Resonated (quieter). Includes bracket locators for 2004 cars. Requires Stage 2 ECU Remap. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk1 (R50) Cooper 1.6i?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-new-mini-mk1-r50-cooper-1-6i-01-06\"\u003eMilltek Cat-back Exhaust New Mini Mk1 R50 Cooper 1.6i 01-06\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eMilltek lists this as a race part without EC approval, so it is intended for off-road and competition use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the version. Milltek's fitting time for each option is shown in its specification table.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated","offer_id":56392888975745,"sku":"MIL-SSXM009","price":1472.59,"currency_code":"GBP","in_stock":true},{"title":"Resonated","offer_id":56392889008513,"sku":"MIL-SSXM013","price":1536.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM009_1.jpg?v=1791893869"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/collections\/mini-mk1-r50-r52-r53.jpg?v=1791897850","url":"https:\/\/milltekexhaustshop.com\/collections\/mini-mk1-r50-r52-r53-performance-exhaust-systems.oembed","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}