{"product_id":"milltek-cat-back-exhaust-bmw-2-series-m240i-coupe-f22-lci-opf-non-xdrive-19-20","title":"Milltek Cat Back Exhaust BMW 2 Series M240i Coupe F22 LCI OPF Non-xDrive 19-20","description":"\u003ch2\u003eMilltek Cat-back Exhaust for BMW 2 Series M240i Coupe (F22 LCI, OPF Only \u0026amp; Non xDrive Models) (2019-2020) – Sharper Sound, Reduced Back Pressure\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's cat-back system for the BMW 2 Series M240i Coupe (F22 LCI, OPF Only \u0026amp; Non xDrive Models). It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in non-resonated or resonated EC approved versions and 5 tailpipe finishes, so you can pick the setup that suits how the car's used.\u003c\/p\u003e\n\u003cp\u003eIt's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Cat-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 66.5mm (2.62\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 1 to 1.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e66.5mm (2.62\") pipework\u003c\/li\u003e\n\u003cli\u003eReplaces the standard exhaust from the catalytic converter back, so the factory cat is retained\u003c\/li\u003e\n\u003cli\u003eChoice of 5 tailpipe finishes: GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished, GT-90 Titanium\u003c\/li\u003e\n\u003cli\u003eEC approved versions available\u003c\/li\u003e\n\u003cli\u003eResonated (quieter) or non-resonated (louder) versions\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBMW 2 Series M240i Coupe (F22 LCI, OPF Only \u0026amp; Non xDrive Models) (2019-2020)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the BMW 2 Series M240i Coupe (F22 LCI, Non-OPF \u0026amp; Non-xDrive), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-bmw-2-series-m240i-coupe-f22-lci-non-opf-non-xdrive-15-18\"\u003eMilltek Cat-back Exhaust BMW 2 Series M240i Coupe (F22 LCI, Non-OPF \u0026amp; Non-xDrive) 15-18\u003c\/a\u003e; the BMW 2 Series M235i Coupé (F22) (Non xDrive), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-bmw-2-series-m235i-coupe-f22-non-xdrive-14-15\"\u003eMilltek Cat-back Exhaust BMW 2 Series M235i Coupé F22 Non xDrive 14-15\u003c\/a\u003e; the BMW 2 Series M2 Coupe (G87 S58 OPF\/GPF Models), which needs the \u003ca href=\"\/products\/milltek-cat-back-exhaust-bmw-2-series-m2-coupe-g87-s58-opf-gpf-23\"\u003eMilltek Cat-back Exhaust BMW 2 Series M2 Coupe G87 S58 OPF\/GPF 23+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 1 to 1.5 hours. Some versions: GPF Back - Non-Resonated Race with Burnt Titanium GT-90 Trims (OE Requires Cutting). Some versions: GPF Back - Non-Resonated Race with Carbon Jet-90 Trims (OE Requires Cutting). Some versions: GPF Back - Non-Resonated Race with Cerakote Black GT-90 Trims (OE Requires Cutting). Some versions: GPF Back - Non-Resonated Race with Polished GT-90 Trims (OE Requires Cutting). We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the resonated and non-resonated versions?\u003c\/h3\u003e\n\u003cp\u003eThe resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.\u003c\/p\u003e\n\u003ch3\u003eWhich tailpipe finishes are available?\u003c\/h3\u003e\n\u003cp\u003eYou can choose from: GT-90 Burnt Titanium, JET-90 Carbon Fibre, GT-90 Cerakote Black, GT-90 Polished, GT-90 Titanium. The finish is cosmetic and does not change the sound.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the BMW 2 Series M240i Coupe (F22 LCI, Non-OPF \u0026amp; Non-xDrive)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-cat-back-exhaust-bmw-2-series-m240i-coupe-f22-lci-non-opf-non-xdrive-15-18\"\u003eMilltek Cat-back Exhaust BMW 2 Series M240i Coupe (F22 LCI, Non-OPF \u0026amp; Non-xDrive) 15-18\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eSome versions are EC approved; check the EC Approved line in the specification for the option you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eNo. It fits behind the factory catalytic converter, so no software changes are needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it keep the factory catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits behind the factory catalytic converter, which stays in place.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 1 to 1.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non-Resonated \/ GT-90 Burnt Titanium","offer_id":56392766292353,"sku":"MIL-SSXBM1116","price":1435.09,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ JET-90 Carbon Fibre","offer_id":56392766325121,"sku":"MIL-SSXBM1100","price":1233.92,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-90 Cerakote Black","offer_id":56392766357889,"sku":"MIL-SSXBM1098","price":1208.35,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-90 Polished","offer_id":56392766390657,"sku":"MIL-SSXBM1097","price":1123.19,"currency_code":"GBP","in_stock":true},{"title":"Non-Resonated \/ GT-90 Titanium","offer_id":56392766423425,"sku":"MIL-SSXBM1099","price":1345.9,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ GT-90 Burnt Titanium","offer_id":56392766456193,"sku":"MIL-SSXBM1104","price":1570.33,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ JET-90 Carbon Fibre","offer_id":56392766488961,"sku":"MIL-SSXBM1105","price":1369.17,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ GT-90 Cerakote Black","offer_id":56392766521729,"sku":"MIL-SSXBM1102","price":1343.59,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ GT-90 Polished","offer_id":56392766554497,"sku":"MIL-SSXBM1101","price":1258.43,"currency_code":"GBP","in_stock":true},{"title":"Resonated - EC Approved \/ GT-90 Titanium","offer_id":56392766587265,"sku":"MIL-SSXBM1103","price":1481.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXBM1116_1.jpg?v=1791892097","url":"https:\/\/milltekexhaustshop.com\/products\/milltek-cat-back-exhaust-bmw-2-series-m240i-coupe-f22-lci-opf-non-xdrive-19-20","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}