Milltek Decat Downpipe for Volkswagen Beetle 2.0 TSI A5 Chassis 2011-2015
This is Milltek's large-bore downpipe and de-cat for the Volkswagen Beetle 2.0 TSI (A5 Chassis). It replaces the factory downpipe with a large-bore pipe and removes the catalytic converter.
Because it removes the catalytic converter, it's intended for off-road and competition use. Missing or modified manufacturer-fitted emissions equipment, such as the catalytic converter, is a major defect at the MOT, so the car isn't road legal set up this way.
Specifications
-
System Type: Large-bore Downpipe and De-cat
-
Pipe Diameter: 76.2mm (3")
-
EC Approved: No
-
Race System: Yes
Key Features
- Made from T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades
- Mandrel-bent pipework, which keeps the pipe diameter consistent through the bends
- 76.2mm (3") pipework
- Removes the factory catalytic converter (off-road and competition use only)
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Seat Leon Cupra R 2.0 TSI 265PS (2010-2012)
- Volkswagen Beetle 2.0 TSI (A5 Chassis) (2011-2015)
- Volkswagen Golf Mk5 GTi 2.0T FSI (2004-2009)
- Volkswagen Golf Mk5 GTi Edition 30 2.0T FSi 230PS (2006-2009)
- Volkswagen Golf Mk6 GTi 2.0 TSI 210PS (2009-2013)
- Volkswagen Golf Mk6 GTi Edition 35 (2011-2012)
- Volkswagen Scirocco R (2009-2016)
Not suitable for: the Seat Leon Cupra 280 & 290 2.0 TSI (Non OPF/GPF Models), which needs the Milltek Downpipe & De-cat Seat Leon Cupra 280 290 2.0 TSI Non OPF/GPF 14-17.
Installation
Before ordering, note: Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap - Only for vehicles with 4 bolt turbo flange. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.
Upgrade Further
Also available from Milltek for this car: Milltek Cat-back Exhaust Seat Leon Cupra R 2.0 TSI 265PS 10-12.
Will it fit the Volkswagen Beetle 2.0 TSI (A5 Chassis)?
Yes. Milltek lists this part for the Volkswagen Beetle 2.0 TSI (A5 Chassis) as well as the other models in the fitment list above.
Does it fit the Seat Leon Cupra 280 & 290 2.0 TSI (Non OPF/GPF Models)?
No. For that car, choose the Milltek Downpipe & De-cat Seat Leon Cupra 280 290 2.0 TSI Non OPF/GPF 14-17.
Is it road legal?
No. A missing catalytic converter is a major defect at the MOT, so it is for off-road and competition use only.
Do I need a remap?
Yes. Milltek notes: "Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap - Only for vehicles with 4 bolt turbo flange". Without suitable software the engine management is likely to log faults.
Can I use it with my standard exhaust?
No. Milltek states it must be fitted with the matching Milltek system, so budget for the cat-back as well.
Will removing the cat cause a warning light?
Without suitable software it is likely to, as the ECU expects the readings a working catalyst gives.
What is it made from?
T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades.
Is there a warranty?
Yes. Milltek's guarantee is 2 years or 80,000km for downpipes, hi-flow catalysts and parts with valves, 2 years for electronic products, and lifetime for its other products. Milltek's Limited Warranty applies to the original purchaser only and is not transferable, and other terms apply. Contact us with your order number if you have a problem.