{"product_id":"milltek-hjs-tuning-ece-downpipes-mini-cooper-s-f55-mk3-2-0-turbo-5dr-hatch-uk-eu-lci-with-opf-gpf-19","title":"Milltek HJS Tuning ECE Downpipes Mini Cooper S F55 Mk3 2.0 Turbo 5dr Hatch UK EU LCI with OPF\/GPF 19+","description":"\u003ch2\u003eMilltek HJS Tuning ECE Downpipes New for New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (UK and European models) - LCI with GPF\/OPF Only (2019 onwards) – Improved Flow, Sports Catalyst\u003c\/h2\u003e\n\u003cp\u003eThis is Milltek's HJS Tuning ECE downpipe set for the New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (UK and European models) - LCI with GPF\/OPF Only. These replace the factory downpipes with HJS high-flow sports catalysts that carry full ECE type-approval, so you get a genuine flow improvement over the restrictive factory units without taking the car outside emissions compliance.\u003c\/p\u003e\n\u003cp\u003eThey're aimed at drivers who want more from the downpipes than the standard units allow, but need the car to stay legally usable on the road and pass an emissions test, which a straight de-cat pipe won't do.\u003c\/p\u003e\n\u003cp\u003eBecause they're type-approved, these can be run on a car that's used on the road, unlike a straight de-cat pipe.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e HJS Tuning ECE Downpipes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Diameter:\u003c\/strong\u003e 70mm (2.76\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC Approved:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace System:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Time:\u003c\/strong\u003e approx. 3 to 3.5 hours (Milltek figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow\u003c\/li\u003e\n\u003cli\u003e70mm (2.76\") pipework\u003c\/li\u003e\n\u003cli\u003eHigh-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases\u003c\/li\u003e\n\u003cli\u003eEC approved\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and manufactured in the UK by Milltek Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (UK and European models) - LCI with GPF\/OPF Only (2019 onwards)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF\/OPF Only (2019-2020)\u003c\/li\u003e\n\u003cli\u003eNew Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF\/OPF Only - 70mm OE Systems (2020-2024)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models \u0026amp; Pre-LCI Only), which needs the \u003ca href=\"\/products\/milltek-hjs-tuning-ece-downpipes-mini-cooper-s-f56-mk3-2-0-turbo-uk-eu-pre-lci-14-18\"\u003eMilltek HJS Tuning ECE Downpipes New Mini Mk3 F56 Mini Cooper S 2.0 Turbo (UK \u0026amp; European \u0026amp; Pre-LCI Only) 14-18\u003c\/a\u003e; the New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (ROW\/NA Models), which needs the \u003ca href=\"\/products\/milltek-sports-cat-downpipe-mini-cooper-s-f55-mk3-2-0-turbo-5dr-hatch-row-na-14\"\u003eMilltek Downpipe \u0026amp; Sports Cat New Mini Mk3 F55 Mini Cooper S 2.0 Turbo - 5dr Hatch ROW \u0026amp; NA 14+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes a fitting time of approx. 3 to 3.5 hours. Before ordering, note: ECE Approved Downpipe with High Flow Sports Cat, fits to OE OPF, Does not require ECU Software (Vehicles made after OCT 2020 will need the heat shield cutting to fit lambda sensor). This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cp\u003eAlso available from Milltek for this car: \u003ca href=\"\/products\/milltek-filter-back-exhaust-mini-cooper-s-f55-mk3-2-0-turbo-5dr-hatch-uk-eu-lci-with-opf-gpf-19\"\u003eMilltek Filter-back Exhaust New Mini Mk3 F55 Mini Cooper S 2.0 Turbo - 5dr Hatch UK \u0026amp; European - LCI with GPF \u0026amp; OPF 19+\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF\/OPF Only?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists this part for the New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF\/OPF Only as well as the other models in the fitment list above.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models \u0026amp; Pre-LCI Only)?\u003c\/h3\u003e\n\u003cp\u003eNo. For that car, choose the \u003ca href=\"\/products\/milltek-hjs-tuning-ece-downpipes-mini-cooper-s-f56-mk3-2-0-turbo-uk-eu-pre-lci-14-18\"\u003eMilltek HJS Tuning ECE Downpipes New Mini Mk3 F56 Mini Cooper S 2.0 Turbo (UK \u0026amp; European \u0026amp; Pre-LCI Only) 14-18\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eEvery version of this part is listed by Milltek as EC approved.\u003c\/p\u003e\n\u003ch3\u003eDo I need a remap?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek notes: \"ECE Approved Downpipe with High Flow Sports Cat, fits to OE OPF, Does not require ECU Software (Vehicles made after OCT 2020 will need the heat shield cutting to fit lambda sensor)\". Without suitable software the engine management is likely to log faults.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with my standard exhaust?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek lists it for use with the factory (OE) exhaust system.\u003c\/p\u003e\n\u003ch3\u003eHow is a sports cat different from a de-cat?\u003c\/h3\u003e\n\u003cp\u003eA sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to fit?\u003c\/h3\u003e\n\u003cp\u003eMilltek quotes approx. 3 to 3.5 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eT304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":56392890777985,"sku":"MIL-SSXM471","price":1722.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3232\/7161\/files\/SSXM471_1.jpg?v=1791893907","url":"https:\/\/milltekexhaustshop.com\/products\/milltek-hjs-tuning-ece-downpipes-mini-cooper-s-f55-mk3-2-0-turbo-5dr-hatch-uk-eu-lci-with-opf-gpf-19","provider":"Milltek Exhaust Shop","version":"1.0","type":"link"}