Milltek Cat Replacement Pipe for Seat Ibiza Cupra 1.8 20VT 180PS (2004-2007) – Maximum Flow, Motorsport Use
This is Milltek's large-bore downpipe and de-cat for the Seat Ibiza Cupra 1.8 20VT 180PS. It replaces the factory downpipe with a larger-bore pipe and removes the catalytic converter entirely, clearing the single most restrictive point in the exhaust for the biggest flow gain available at this position in the system. It's usually fitted alongside a Stage 2 remap, since the ECU needs to be told to expect the different readings the lambda sensors give once the cat's gone.
It's built for owners already committed to a serious power upgrade rather than a casual bolt-on, so pair it with the matching Milltek cat-back system for the full effect.
Because it removes the cat, it's intended for off-road and competition use. A de-catted car will fail an MOT emissions test and isn't legal to use on UK roads.
Specifications
-
System Type: Cat Replacement Pipe
-
Pipe Diameter: 63.5mm (2.5")
-
EC Approved: No
-
Race System: Yes
Key Features
- Made from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration
- Mandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow
- 63.5mm (2.5") pipework
- Removes the factory catalyst for maximum flow (off-road and competition use only)
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Seat Ibiza Cupra 1.8 20VT 180PS (2004-2007)
- Seat Ibiza FR 1.8 20VT (Formula Racing) (2004-2008)
- Volkswagen Polo GTi 1.8T (2006-2010)
Not suitable for: the Seat Ibiza Cupra 1.8TFSI (6P), which needs the Milltek Downpipe & De-cat Seat Ibiza Cupra 1.8TFSI 6P 16-17.
Installation
Before ordering, note: Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.
Upgrade Further
Also available from Milltek for this car: Milltek Cat-back Exhaust Volkswagen Polo GTi 1.8T 06-10.
Will it fit the Seat Ibiza FR 1.8 20VT (Formula Racing)?
Yes. Milltek lists this part for the Seat Ibiza FR 1.8 20VT (Formula Racing) as well as the other models in the fitment list above.
Does it fit the Seat Ibiza Cupra 1.8TFSI (6P)?
No. For that car, choose the Milltek Downpipe & De-cat Seat Ibiza Cupra 1.8TFSI 6P 16-17.
Is it road legal?
No. Removing the catalyst means the car will fail an MOT emissions test, so it is for off-road and competition use only.
Do I need a remap?
Yes. Milltek notes: "Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap". Without suitable software the engine management is likely to log faults.
Can I use it with my standard exhaust?
No. Milltek states it must be fitted with the matching Milltek system, so budget for the cat-back as well.
Will removing the cat cause a warning light?
Without suitable software it is likely to, as the ECU expects the readings a working catalyst gives. This is why Milltek pairs it with a remap.
What is it made from?
T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.
Is there a warranty?
Yes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.
