Milltek Downpipe for Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards) – Improved Turbo Flow
This is Milltek's downpipe for the Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped). It replaces the factory downpipe with a less restrictive design for improved flow at one of the most restrictive points in the system. Check the specification below to see whether this particular version retains a catalyst. It's offered in a choice of cat (De-cat with GPF Delete, GPF Delete), so you can pick the setup that suits how the car's used.
Specifications
-
System Type: Downpipe
-
Pipe Diameter: 80mm (3.15")
-
EC Approved: No
-
Race System: Yes
-
Fitting Time: approx. 2 to 2.5 hours (Milltek figure)
Key Features
- Made from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration
- Mandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow
- 80mm (3.15") pipework
- Larger, less restrictive downpipe improves flow from the turbo outlet
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 onwards)
- Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018-2020)
- Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020-2023)
Not suitable for: any model, engine or body style not listed above. Check your car before ordering.
Installation
Milltek quotes a fitting time of approx. 2 to 2.5 hours. Some versions: 80mm Decat Downpipe - Fits to Milltek Sport GPF Delete Only - Requires Stage 2 ECU Remap. Some versions: 80mm Downpipe with 200CPSI High Flow Sports Cat - Fits to Milltek Sport GPF Delete Only - Requires Stage 2 ECU Remap. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.
Upgrade Further
Also available from Milltek for this car: Milltek Active Valve Control Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+, Milltek GPF/OPF Bypass Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+, Milltek Cat-back Exhaust Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS Post Sept 2020 20+.
Will it fit the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only)?
Yes. Milltek lists this part for the Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) as well as the other models in the fitment list above.
Is it road legal?
Milltek lists this as a race part without EC approval, so it is intended for off-road and competition use.
Do I need a remap?
A suitable remap is strongly recommended, as the engine management needs to account for the change in flow and sensor readings. Speak to your tuner before fitting.
How long does it take to fit?
Milltek quotes approx. 2 to 2.5 hours.
What is it made from?
T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.
Is there a warranty?
Yes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.
