Milltek Downpipes with Cat Bypass for Audi S8 D5 4.0 TFSI V8 Saloon Standard Wheel Base Non-OPF/GPF US ROW 2020 onwards
This is Milltek's downpipe set with cat bypass pipes for the Audi S8 D5 4.0 TFSI V8 Saloon/Sedan - Standard Wheel Base (Non OPF/GPF US/ROW Models). They replace the factory downpipes and remove the catalytic converters. It's offered in versions to suit the factory or a Milltek system, so you can pick the setup that suits how the car's used.
Because they remove the catalytic converters, they're intended for off-road and competition use. Missing or modified manufacturer-fitted emissions equipment, such as the catalytic converter, is a major defect at the MOT, so the car isn't road legal set up this way.
Specifications
-
System Type: Large-bore Downpipes and Cat Bypass Pipes
-
Pipe Diameter: 80mm (3.15")
-
EC Approved: No
-
Race System: Yes
-
Fitting Time: approx. 3.5 to 4.5 hours (Milltek figure)
Key Features
- Made from T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades
- Mandrel-bent pipework, which keeps the pipe diameter consistent through the bends
- 80mm (3.15") pipework
- Removes the factory catalytic converter (off-road and competition use only)
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Audi RS6 C8 4.0 V8 bi-turbo in Performance Edition (Non OPF/GPF Models - USA/ROW Models) (2020 onwards)
- Audi RS7 C8 4.0 V8 bi-turbo (Non OPF/GPF US/ROW Models) (2019 onwards)
- Audi S8 D5 4.0 TFSI V8 Saloon/Sedan - Long Wheel Base (Non OPF/GPF US/ROW Models) (2020 onwards)
- Audi S8 D5 4.0 TFSI V8 Saloon/Sedan - Standard Wheel Base (Non OPF/GPF US/ROW Models) (2020 onwards)
Not suitable for: the Audi RS6 C8 4.0 V8 bi-turbo in Performance Edition (OPF/GPF Models), which needs the Milltek Downpipes & Cat Bypass Pipes Audi RS6 C8 4.0 V8 bi-turbo OPF/GPF 19+.
Installation
Milltek quotes a fitting time of approx. 3.5 to 4.5 hours. Some versions: Fits to Milltek Sport Cat Back System - Requires Stage 2 ECU Software. Some versions: Fits to OE Catback Back System - Requires Stage 2 ECU Software. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.
Upgrade Further
Also available from Milltek for this car: Milltek Front Pipe-back Exhaust Audi RS6 C8 4.0 V8 Bi-Turbo OPF/GPF 19+.
Will it fit the Audi RS7 C8 4.0 V8 bi-turbo (Non OPF/GPF US/ROW Models)?
Yes. Milltek lists this part for the Audi RS7 C8 4.0 V8 bi-turbo (Non OPF/GPF US/ROW Models) as well as the other models in the fitment list above.
Does it fit the Audi RS6 C8 4.0 V8 bi-turbo in Performance Edition (OPF/GPF Models)?
No. For that car, choose the Milltek Downpipes & Cat Bypass Pipes Audi RS6 C8 4.0 V8 bi-turbo OPF/GPF 19+.
Is it road legal?
No. A missing catalytic converter is a major defect at the MOT, so it is for off-road and competition use only.
Do I need a remap?
Yes. Milltek notes: "Fits to Milltek Sport Cat Back System - Requires Stage 2 ECU Software". Without suitable software the engine management is likely to log faults.
Can I use it with my standard exhaust?
It depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.
Will removing the cat cause a warning light?
Without suitable software it is likely to, as the ECU expects the readings a working catalyst gives.
How long does it take to fit?
Milltek quotes approx. 3.5 to 4.5 hours.
What is it made from?
T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades.
Is there a warranty?
Yes. Milltek's guarantee is 2 years or 80,000km for downpipes, hi-flow catalysts and parts with valves, 2 years for electronic products, and lifetime for its other products. Milltek's Limited Warranty applies to the original purchaser only and is not transferable, and other terms apply. Contact us with your order number if you have a problem.