Milltek Filter Back Exhaust for BMW 4 Series G82 M4 Comp S58 3.0 Turbo OPF/GPF 2020 onwards
This is Milltek's particulate filter-back system for the BMW 4 Series G82 M4 & M4 Competition S58 3.0 Turbo (OPF/GPF Equipped Cars Only). It replaces the factory exhaust from the particulate filter back. It's offered in 5 tailpipe finishes, so you can pick the setup that suits how the car's used.
The factory particulate filter stays in place, and Milltek says no remap is needed for a GPF-back system.
Specifications
-
System Type: Particulate Filter-back
-
Pipe Diameter: 80mm (3.15")
-
EC Approved: No
-
Race System: No
-
Fitting Time: approx. 1.5 to 2 hours (Milltek figure)
Key Features
- Made from T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades
- Mandrel-bent pipework, which keeps the pipe diameter consistent through the bends
- 80mm (3.15") pipework
- Fits behind the factory particulate filter, which stays in place
- Choice of 5 tailpipe finishes: GT-115 Brushed Titanium, GT-115 Burnt Titanium, GT-115 Cerakote Black, GT-115 Polished, JET-115 Carbon Fibre
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- BMW 3 Series G80 M3 & M3 Competition S58 3.0 Turbo (North American/ROW Non-OPF/GPF Cars Only) (2021 onwards)
- BMW 3 Series G80/G81 M3 & M3 Competition S58 3.0 Turbo (OPF/GPF Equipped Cars Only) inc Touring & XDrive Models (2020 onwards)
- BMW 4 Series G82 M4 & M4 Competition S58 3.0 Turbo (North American/ROW Non-OPF/GPF Cars Only) (2021 onwards)
- BMW 4 Series G82 M4 & M4 Competition S58 3.0 Turbo (OPF/GPF Equipped Cars Only) (2020 onwards)
Not suitable for: the BMW 3 Series G20 & G21 M340i XDrive Saloon & Touring Models (OPF/GPF Models Only) Pre LCI, which needs the Milltek Filter-back Exhaust BMW 3 Series G20 & G21 M340i XDrive Saloon & Touring OPF/GPF Pre LCI 19-25.
Installation
Milltek quotes a fitting time of approx. 1.5 to 2 hours. Some versions: OPF/GPF Back with Centre Resonator Bypass System with GT-115 Brushed Titanium Trims (OE Requires Cutting). Some versions: OPF/GPF Back with Centre Resonator Bypass System with GT-115 Burnt/Blue Titanium Trims (OE Requires Cutting). Some versions: OPF/GPF Back with Centre Resonator Bypass System with GT-115 Cerakote Black Trims (OE Requires Cutting). Some versions: OPF/GPF Back with Centre Resonator Bypass System with GT-115 Polished Trims (OE Requires Cutting). We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.
Upgrade Further
Also available from Milltek for this car: Milltek Secondary Catalyst Bypass BMW 3 Series G80 M3 & M3 Comp S58 3.0 Turbo (North American & ROW Non-OPF/GPF Cars Only) 21+, Milltek GPF/OPF Bypass BMW 3 Series G80 & G81 M3 & M3 Comp S58 3.0 Turbo OPF/GPF inc Touring & XDrive 20+.
Which tailpipe finishes are available?
You can choose from: GT-115 Brushed Titanium, GT-115 Burnt Titanium, GT-115 Cerakote Black, GT-115 Polished, JET-115 Carbon Fibre. The finish is cosmetic.
Will it fit the BMW 3 Series G80/G81 M3 & M3 Competition S58 3.0 Turbo (OPF/GPF Equipped Cars Only) inc Touring & XDrive Models?
Yes. Milltek lists this part for the BMW 3 Series G80/G81 M3 & M3 Competition S58 3.0 Turbo (OPF/GPF Equipped Cars Only) inc Touring & XDrive Models as well as the other models in the fitment list above.
Does it fit the BMW 3 Series G20 & G21 M340i XDrive Saloon & Touring Models (OPF/GPF Models Only) Pre LCI?
No. For that car, choose the Milltek Filter-back Exhaust BMW 3 Series G20 & G21 M340i XDrive Saloon & Touring OPF/GPF Pre LCI 19-25.
Is it road legal?
Milltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.
Do I need a remap?
No. Milltek says no remap is needed for a GPF-back system.
Does it keep the factory particulate filter?
Yes. It fits behind the factory particulate filter, which stays in place.
How long does it take to fit?
Milltek quotes approx. 1.5 to 2 hours.
What is it made from?
T304L aircraft-grade stainless steel, which Milltek says resists degradation and discolouration better than many other grades.
Is there a warranty?
Yes. Milltek's guarantee is 2 years or 80,000km for downpipes, hi-flow catalysts and parts with valves, 2 years for electronic products, and lifetime for its other products. Milltek's Limited Warranty applies to the original purchaser only and is not transferable, and other terms apply. Contact us with your order number if you have a problem.