Milltek Filter-back Exhaust for Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 onwards) – Sharper Sound, Filter Retained
This is Milltek's particulate filter-back system for the Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (OPF/GPF Vehicles Only). It replaces everything downstream of the factory diesel or petrol particulate filter with wider-bore pipework and re-tuned silencers, cutting back pressure and sharpening the exhaust note. The filter itself is left exactly where the manufacturer fitted it, so emissions equipment is unaffected. It's offered in non-resonated, resonated or resonated EC approved versions and 6 tailpipe finishes, so you can pick the setup that suits how the car's used.
It's the right choice if you want a sportier sound and a genuine, if modest, flow improvement on a filter-equipped car, without going anywhere near the parts of the system that keep it emissions-compliant.
Specifications
-
System Type: Particulate Filter-back
-
Pipe Diameter: 70mm (2.76")
-
Race System: No
Key Features
- Made from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration
- Mandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow
- 70mm (2.76") pipework
- Fits behind the factory particulate filter, which stays in place
- Choice of 6 tailpipe finishes: GT-90 Special Edition Cerakote Black, GT-90 Cerakote Black, GT-90 Brushed Titanium, GT-90 Burnt Titanium, GT-90 Polished, JET-90 Carbon Fibre
- EC approved versions available
- Resonated (quieter) or non-resonated (louder) versions
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 onwards)
- Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (OPF/GPF Vehicles Only) (2021 onwards)
Not every version fits every car in this list. Check the fitment shown for the option you select.
Not suitable for: the Land Rover/Range Rover Defender 90 5.0 V8 425PS & 525PS (NAS Non-OPF/GPF Vehicles Only), which needs the Milltek Filter-back Exhaust Land Rover Defender 90 5.0 V8 425PS & 525PS OPF/GPF Vehicles 21+; the Land Rover/Range Rover Defender 130 5.0 V8 425PS & 500PS (NAS Non-OPF/GPF Vehicles Only), which needs the Milltek Filter-back Exhaust Land Rover Defender 130 5.0 V8 425PS & 525PS OPF/GPF Vehicles 23+; the Land Rover/Range Rover Defender 110 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible), which needs the Milltek Filter-back Exhaust Land Rover Defender 110 2.0 I4 P300 & P400e (OPF/GPF & Non-OPF/GPF Vehicle Compatible) 20+.
Installation
The fitting time varies by version; see the specification table for the option you choose. We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.
Upgrade Further
Also available from Milltek for this car: Milltek Active Valve Control Land Rover Defender 110 5.0 V8 425PS 525PS OPF/GPF 21+.
What's the difference between the resonated and non-resonated versions?
The resonated version adds extra silencing for a quieter, more refined tone. The non-resonated version leaves it out, so it is louder and more aggressive.
Which tailpipe finishes are available?
You can choose from: GT-90 Special Edition Cerakote Black, GT-90 Cerakote Black, GT-90 Brushed Titanium, GT-90 Burnt Titanium, GT-90 Polished, JET-90 Carbon Fibre. The finish is cosmetic and does not change the sound.
Will it fit the Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (OPF/GPF Vehicles Only)?
Yes. Milltek lists this part for the Land Rover/Range Rover Defender 110 5.0 V8 425PS & 525PS (OPF/GPF Vehicles Only) as well as the other models in the fitment list above.
Does it fit the Land Rover/Range Rover Defender 90 5.0 V8 425PS & 525PS (NAS Non-OPF/GPF Vehicles Only)?
No. For that car, choose the Milltek Filter-back Exhaust Land Rover Defender 90 5.0 V8 425PS & 525PS OPF/GPF Vehicles 21+.
Is it road legal?
Some versions are EC approved; check the EC Approved line in the specification for the option you choose.
Do I need a remap?
No. It fits behind the factory particulate filter, so no software changes are needed.
Does it keep the factory particulate filter?
Yes. It fits behind the factory particulate filter, which stays in place.
How long does it take to fit?
It depends on the version. Milltek's fitting time for each option is shown in its specification table.
What is it made from?
T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.
