Milltek Downpipe & Sports Cat for Audi RS3 Saloon/Sedan 400PS (8V MQB) - OPF/GPF Models (2019 onwards) – Improved Flow, Sports Catalyst
This is Milltek's large-bore downpipe with hi-flow sports cat for the Audi RS3 Saloon/Sedan 400PS (8Y MQB EVO) - OPF/GPF Models. It replaces the restrictive factory downpipe with a larger-bore pipe fitted with a high-flow sports catalyst in place of the standard unit, using a less dense substrate that flows significantly better than the factory cat while still treating the exhaust gases passing through it.
It sits between a stock downpipe and a full de-cat: a genuine flow gain suited to a Stage 1 or Stage 2 remap, without giving up the catalyst entirely the way a de-cat pipe does.
In the UK, a replacement catalyst on a car first registered from 1 March 2001 needs ECE R103 type-approval to be road legal, so check the EC Approved line in the specification for the version you choose.
Specifications
-
System Type: Large Bore Downpipe and Hi-Flow Sports Cat
-
Pipe Diameter: 76.2mm (3")
-
EC Approved: No
-
Race System: Yes
Key Features
- Made from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration
- Mandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow
- 76.2mm (3") pipework
- High-flow sports catalyst flows better than the dense factory unit while still treating exhaust gases
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- Audi RS3 Saloon/Sedan 400PS (8V MQB) - OPF/GPF Models (2019 onwards)
- Audi RS3 Saloon/Sedan 400PS (8Y MQB EVO) - OPF/GPF Models (2021 onwards)
- Audi RS3 Sportback 400PS (8V MQB - Facelift Only) - OPF/GPF Models (2019 onwards)
- Audi RS3 Sportback 400PS (8Y MQB EVO) - OPF/GPF Models (2021 onwards)
- Audi RSQ3 2.5T Sportback & SUV (OPF/GPF Equipped Models Only) (2020 onwards)
- Audi TT Mk3 TTRS 2.5TFSI Quattro (OPF/GPF Models) (2019 onwards)
Not suitable for: the Audi RS3 Saloon/Sedan 400PS (8V MQB) - Non-OPF/GPF Models, which needs the Milltek HJS Tuning ECE Downpipes Audi RS3 Saloon 400PS 8V MQB Non-OPF/GPF 17+.
Installation
Before ordering, note: Fits both OE and Milltek Sport Cat Back Systems - Requires Stage 2 ECU Software. This work involves removing parts close to the turbo and engine, so we recommend fitting by a specialist with a ramp and suitable software support.
Upgrade Further
Also available from Milltek for this car: Milltek Filter-back Exhaust Audi RS3 Sportback 8Y OPF/GPF 21+.
Will it fit the Audi RS3 Saloon/Sedan 400PS (8Y MQB EVO) - OPF/GPF Models?
Yes. Milltek lists this part for the Audi RS3 Saloon/Sedan 400PS (8Y MQB EVO) - OPF/GPF Models as well as the other models in the fitment list above.
Does it fit the Audi RS3 Saloon/Sedan 400PS (8V MQB) - Non-OPF/GPF Models?
No. For that car, choose the Milltek HJS Tuning ECE Downpipes Audi RS3 Saloon 400PS 8V MQB Non-OPF/GPF 17+.
Is it road legal?
Milltek lists this as a race part without EC approval, so it is intended for off-road and competition use.
Do I need a remap?
Yes. Milltek notes: "Fits both OE and Milltek Sport Cat Back Systems - Requires Stage 2 ECU Software". Without suitable software the engine management is likely to log faults.
Can I use it with my standard exhaust?
It depends on the version. Some are made for the factory (OE) system and others for the Milltek cat-back, so check the notes for the option you choose.
How is a sports cat different from a de-cat?
A sports cat still contains a catalyst, just a less dense one that flows better than the factory unit. A de-cat removes the catalyst completely.
What is it made from?
T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.
Is there a warranty?
Yes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.
