Milltek Cat-back Exhaust for BMW 3 Series E90 M3 4.0 V8 Saloon/Sedan (2007-2011) – Sharper Sound, Reduced Back Pressure
This is Milltek's cat-back system for the BMW 3 Series E93 M3 4.0 V8 Convertible. It replaces everything from the factory catalytic converter rearward with wider-bore pipework, a re-profiled mid-pipe and silencers tuned specifically for this platform, cutting back pressure and sharpening the exhaust note. The factory catalytic converter stays in place, so the car's emissions hardware is left as standard. It's offered in valved or non-valved versions and 2 tailpipe finishes, so you can pick the setup that suits how the car's used.
It's aimed at owners who want a noticeably different sound and a genuine, if modest, flow improvement without touching anything upstream of the cat: a straightforward bolt-on that doesn't need a remap or any other supporting mods to enjoy.
Specifications
-
System Type: Cat-back
-
Pipe Diameter: 70mm (2.76")
-
EC Approved: No
-
Race System: No
Key Features
- Made from T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration
- Mandrel-bent pipework keeps a constant diameter through every bend for unrestricted flow
- 70mm (2.76") pipework
- Replaces the standard exhaust from the catalytic converter back, so the factory cat is retained
- Choice of 2 tailpipe finishes: GT-80 Cerakote Black, GT-80 Polished
- Valved versions available for switchable volume
- Designed, developed and manufactured in the UK by Milltek Sport
Fitment
- BMW 3 Series E90 M3 4.0 V8 Saloon/Sedan (2007-2011)
- BMW 3 Series E92 M3 4.0 V8 Coupé (2007-2013)
- BMW 3 Series E93 M3 4.0 V8 Convertible (2007-2013)
Not suitable for: the BMW 3 Series E46 M3 3.2 Coupe - Cabriolet, which needs the Milltek Cat-back Exhaust BMW 3 Series E46 M3 3.2 Coupe Cabriolet 01-07; the BMW 3 Series E36 M3 3.0/3.2, which needs the Milltek Cat-back Exhaust BMW 3 Series E36 M3 3.0 3.2 92-99; the BMW 3 Series F80 M3 & M3 Competition Saloon (Non OPF/GPF Models Only), which needs the Milltek Cat-back Exhaust BMW 3 Series F80 M3 M3 Comp Saloon Non OPF/GPF 14-18.
Installation
We recommend professional fitting on a ramp. Once fitted, check the tailpipe alignment and re-check all clamps after the first few hundred miles.
Upgrade Further
Also available from Milltek for this car: Milltek Hi-Flow Sports Cat & Downpipe BMW 3 Series E90 M3 4.0 V8 Saloon 07-11.
Should I choose the valved or non-valved version?
The valved version lets you switch between a quieter tone and the full exhaust note. Choose non-valved if you want the same sound all the time.
Which tailpipe finishes are available?
You can choose from: GT-80 Cerakote Black, GT-80 Polished. The finish is cosmetic and does not change the sound.
Will it fit the BMW 3 Series E92 M3 4.0 V8 Coupé?
Yes. Milltek lists this part for the BMW 3 Series E92 M3 4.0 V8 Coupé as well as the other models in the fitment list above.
Does it fit the BMW 3 Series E46 M3 3.2 Coupe - Cabriolet?
No. For that car, choose the Milltek Cat-back Exhaust BMW 3 Series E46 M3 3.2 Coupe Cabriolet 01-07.
Is it road legal?
Milltek does not list EC approval for this part. Any exhaust used on the road must still meet noise and emissions rules, so check the requirements where you live.
Do I need a remap?
No. It fits behind the factory catalytic converter, so no software changes are needed.
Does it keep the factory catalytic converter?
Yes. It fits behind the factory catalytic converter, which stays in place.
What is it made from?
T304L aircraft-grade stainless steel, which is anti-magnetic and resists discolouration better than lower grades.
Is there a warranty?
Yes. Milltek products are covered against defects in materials and workmanship. Contact us with your order number if you have a problem.
